 |
Identify and label each door location for consistent referencing.
|
 |
Determine each door’s opening width and height requirements.
Determine clearances:
Measure available headroom. This is
the distance from the header to the ceiling or any obstruction
above the header.
Measure backroom, the horizontal distance
from the wall back to the outermost portion of the operator (if
motor operated), or near the end of the horizontal track (if manual
operated).
Measure sideroom, the distance from
the edge of the opening (including any guide setback) to the outside
of mechanisms on the drive or tension brackets and outside the
motor if mounted in this area.
|
 |
Select the door type: Sectional Insulated, Sectional Non- Insulated
or Full View.
|
 |
Determine option requirements.
|
 |
Determine door operator needs: manual or motor operator. NOTE: Options,
such as automated door electronics, can be specific.
|
 |
Determine usage frequency for proper spring specification high
cycle spring options.
|
 |
Determine desired aesthetic: Rib Panel, Raised Panel and/or Embossed
pattern, along with desired finish/color.
|
 |
Finishes are available in factory-finished, or baked-on enamel
finishes. Request color selector for full color options. |
